Cisco Router IOS XR Getting Started Manual page 37

Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router
0/1/*: Module (host) LED status says: OK
0/1/*: Module (jacket) LED status says: OK
0/1/*: Module (spa0) LED status says: OK
0/1/*: Module (spa5) LED status says: OK
0/6/*: Module (host) LED status says: OK
0/6/*: Module (jacket) LED status says: OK
0/6/*: Module (spa0) LED status says: OK
0/6/*: Module (spa4) LED status says: OK
0/6/*: Module (spa5) LED status says: OK
0/RP0/*: Module (host) LED status says: OK
0/RP0/*: Alarm LED status says: NONE
0/RP1/*: Module (host) LED status says: OK
0/RP1/*: Alarm LED status says: NONE
See the Cisco IOS XR Interface and Hardware Component Command Reference for more information.
show platform Command
The show platform command displays information on router resources. In EXEC mode, the show
platform command displays the resources assigned to the secure domain router (SDR) you are
managing. In administration EXEC mode, the show platform command displays all router resources.
SDRs are introduced in
Note
The following EXEC mode sample output displays the nodes assigned to the default SDR, which is
called the owner SDR:
RP/0/RP0/CPU0:router# show platform
Node
-----------------------------------------------------------------------------
0/1/CPU0
0/1/0
0/1/5
0/6/CPU0
0/6/0
0/6/4
0/6/5
0/RP0/CPU0
0/RP1/CPU0
The following administration EXEC mode sample output displays all router nodes:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# show platform
Node
-----------------------------------------------------------------------------
0/1/SP
0/1/CPU0
0/1/0
0/1/5
0/6/SP
0/6/CPU0
0/6/0
0/6/4
0/6/5
0/RP0/CPU0
0/RP1/CPU0
0/SM0/SP
0/SM1/SP
OL-10957-02
Chapter 4, "Configuring General Router Features."
Type PLIM
MSC Jacket Card
MSC(SPA) 4XOC3-POS
MSC(SPA) 8X1GE
MSC Jacket Card
MSC(SPA) 4XOC3-POS
MSC(SPA) 8XOC3/OC12-POS
MSC(SPA) 8X1GE
RP(Active) N/A
RP(Standby) N/A
Type PLIM
MSC(SP) N/A
MSC Jacket Card
MSC(SPA) 4XOC3-POS
MSC(SPA) 8X1GE
MSC(SP) N/A
MSC Jacket Card
MSC(SPA) 4XOC3-POS
MSC(SPA) 8XOC3/OC12-POS
MSC(SPA) 8X1GE
RP(Active) N/A
RP(Standby) N/A
FC/S(SP) N/A
FC/S(SP) N/A
Verifying the System After Initial Bring-Up
State Config State
IOS XR RUN PWR,NSHUT,MON
OK PWR,NSHUT,MON
OK PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
OK PWR,NSHUT,MON
OK PWR,NSHUT,MON
OK PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
State Config State
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
OK PWR,NSHUT,MON
OK PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
OK PWR,NSHUT,MON
OK PWR,NSHUT,MON
OK PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
IOS XR RUN PWR,NSHUT,MON
Cisco IOS XR Getting Started Guide
2-7