Page 1
10' W x 20' L x 10' H is prohibited without permission. 1040SS 10' W x 40' L x 10' H 1060SS 10' W x 60' L x 10' H Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Failing to anchor the shelter properly will void the manufacturer’s warranty and may cause serious injury and damage. Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
These words and phrases are common to most ClearSpan™ shelters and identify the different parts of the shelter. (Some are used in this document. Others may not apply to this particular shelter.) These terms describe the shipped parts and can also be found on the materials list/spec sheets included with the shipment.
QUICK START GUIDE For an overview of this shelter and to see the main connection details, consult the diagrams in the Quick Start Guide located at the back of these instructions. Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Page 5
(Not all parts are shown.) 103856 Band Clamp Through Port Cross Port Cross Port 103839 CC4595 5-Way Coupler Ball Tie Down 103837 103838 2375P120 Plain Pipe Straight Coupler Strut 2375P120D Drilled Pipe Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Page 6
4. Prepare and install the cover. Purlins Rafters ATTENTION: Position screws so they will not touch the cover when it is installed. Frame length shown may differ from actual frame. Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Page 7
NOTE: You can assemble all the 20' purlin assemblies required for your shelter at this time, or assemble them as you go. Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Use the Quick Start diagrams to properly space the ground posts if used. *Additional purchase required for mounting feet and ground posts. Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Slide additional band clamps onto and repeat the above steps as needed to assemble the the legs of each rafter assembly as needed. remainder of the frame. Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Page 10
8. With the struts in position, tighten the band clamps. 9. Once the frame assembly is complete, verify that all frame bolts are tight, anchor the frame, and install the cover. Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Page 11
Use one snugger ball for each grommet. 3. Continue with the shelter care and maintenance information that follows. Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
For replacement or missing parts, call 1-800-245-9881 for assistance. NOTE: With the exception of Truss Arch buildings, ClearSpan™ shelters and greenhouses do not have any tested loading criteria. Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Page 13
10'-2 3/4" Width F F R R O O N N T T Grid Represents 12" Squares 1020SS (10' x 20') 1040SS (10' x 40') 1060SS (10' x 60') Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Page 14
CLEARSPAN SUNBLOCKER SYSTEM ™ Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Page 15
CLEARSPAN SUNBLOCKER SYSTEM ™ Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Page 16
CLEARSPAN SUNBLOCKER SYSTEM ™ Visit www.ClearSpan.com for additional products and customer assistance. Revision date: 10.04.07...
Page 17
CLEARSPAN SUNBLOCKER SYSTEM ™ Revision date: 10.04.07 Visit www.ClearSpan.com for additional products and customer assistance.
Need help?
Do you have a question about the 1020SS and is the answer not in the manual?
Questions and answers