Table of Contents
Advertisement
1.1.4 Installation
☛ Install the SAP10e device on the Ethernet wall plugs of the buildings following the installation plan given by your IT departement.
The SAP10e device has to be plugged to an Ethernet wall plug supporting PoE IEEE802.3af.
Given the device footprint, it is preconised to use Ethernet wall plug plastron with a right insertion.
Consequently, the Ethernet wall plug whose plastron is angled is not supported.
☛ Thanks to the lock pin of its Ethernet connector, the SAP10e device can be installed on vertical surfaces, like walls as well as horiz ontal
surfaces, like ceilings.
9
Advertisement
Table of Contents
