Qeedji SAP10e User Manual page 24

Then, these are the available buttons associated to the selected SLATE:
 Move up SL ATEs indices
 Move down SL ATEs indices
: allows to unpair a SLATE from this SAP10e device,
 U npair
: allows to pair manually a SLATE to this SAP10e device by entering its PSN and an optional PIN code,
 Pair
☛ If required, it is possible to change the hostname of each slate, set the same PIN code for all SLATEs and activate temporarily the TestCard
by changing some user preferences. For further information, refer to the chapter §
The pairing
◬
PI N code
Move the SLATE to the appropriate index.
The index must be aligned with the slide ranking of your MS-PowerPoint presentation.
◬
d) Finalize the pairing procedure with
To complete the SAP10e device configuration, click on the
☛ When the pairing is finished, you can save the
further information, refer to the chapter §
Then check the pairing index and the hostname in the
: allows to change the SLATE
: allows to change the SLATE
can be modified successfully only when first a pairing has already been completed.
button:
Deactivate
prefs.json
Maintenance >
W PAN Peripherals
by decreasing it,
I ndex
by increasing it,
I ndex
Maintenance >
button.
Deactivate
file preciously to be able to restore the device configuration afterwards. For
Files.
menu of the
I nformation
24
Preferences.
pane.