3.1.8 Maintenance > F iles
pane, select the F iles menu to see the files hosted at the root WebDAV directory.
In the
Maintenance
It contains a
directory and a
.conf
1
As soon as a modification is done through the
created in the
folder.
.conf
After having pressed on the R estore factory preferences button, the
◬
The content of the
◬
prefs.json
Save or restore a pairing configuration
O nce all your SLATEs are paired on the appropriate index, it is recommended to save the
◬
devices to be able to restore easily their pairing configuration afterwards. To restore the pairing configuration, go in the
then use the
upload
4
The hub.ppk source for each SLATE content update is stored in the respective
going from index 1 to index 10.
Date and time
The system date and time can only be set and updated thanks to a NTP server¹ . In this case, you have to:
First:
define the timezone value,
define the NTP server UR L,
activate the NTP server (not activated by default).
☛ For further information, refer to the chapter §
Secondly:
define the gateway UR L to access to internet,
define valid primary and secondary DNS servers when using a domain name for the NTP server UR L.
For further information, refer to the chapter §
1
2
directory.
.output
2
Administration console
configuration file can be different for
3
button to upload the
prefs.json
3
Maintenance >
Configuration > Servers
user interface, a
prefs.json
file is erased.
prefs.json
application and other applications.
regular
file.
1
4
/.output/<slate_index>/
Preferences.
and to the chapter §
Configuration >
32
file, corresponding to the new configuration, is
file preciously for all your SAP10e
prefs.json
3
.conf
WebDAV directories, with
LAN.
directory
1
<slate_index>/