Qeedji SAP10e User Manual page 34

Install a new pictureframe release version for SLATEs w ith your SAP10e device
To install a new pictureframe release version for the SLATEs paired to your SAP10e device, download the wished pictureframe software version from
the Qeedji Web site.
pane, select the F iles menu to see the files hosted at the root WebDAV directory. Then click on the
In the
Maintenance
directory.
common/
Press on the  button and load the appropriate
1
That' s all. The SLATE should then upgrade their pictureframe software in few minutes.
☛ Do not keep two
pictureframe-slate106-setup-x x .yy.zz.rpk
☛ To remove the
pictureframe-slate106-setup-x x .yy.zz.rpk
☛ The
pictureframe-slate106-setup-x x .yy.zz.rpk
☛ You can also open a WebDAV client and connect to the SAP10e device, copy the
WebDAV directory of the SAP10e device. At the next wake up, the SLATE should download and install the new pictureframe
.output/common
release version.
Application upgrade
The application can be upgraded by pushing a new firmware file
regular
directory
http://<device-ip-addr>/
into account.
pictureframe-slate106-setup-xx.yy.zz.rpk
1
file, fly over the file with the mouse to make appear the
file is persistent after a device reboot.
with a WebDAV client. After the firmware file pushing, a device reboot is required so that the firmware file is taken
(xx.yy.zz > 1.11.11).
files on this directory. Think to remove the obsolete one.
pictureframe-slate106-setup-x x .yy.zz.rpk
bm0032_regular-sap10e-xx.yy.zz.bin
34
directory then on the
.output
button, then click on it.

file into the
at the root of the device WebDAV