Applicative User Interface - Qeedji SAP10e User Manual

2 .1 Applicative user interface
The SAP10e device has a Web user interface that can be accessed with a Web browser. The supported browsers are:
and
MS-Edge MS-Edge ( Chromium)
It is accessible from the UR L:
B y default, the login credentials for the device Web user interface are:
login: ,
admin
password: .
admin
The UR L falls automatically into the
view the SLATE content from SLATE index 1 to SLATE index 10 and check whether each SLATEs content is synchronized with the SAP10e device
content source,
display a synchronization status for each SLATE index with the following background color:
grey: default color when no SLATE is paired for this index,
green: the SLATE content is correctly synchronized,
orange: the SLATE content synchronization state is not yet determined,
red: the SLATE content is not correctly synchronized.
☛ To refresh the synchroniz ation status, click on the
☛ To be synchroniz ed, the SLATEs needs to be paired first with the right index. To check simply whether some SLATEs are paired to the SAP10e,
refer to the chapter § Information > WPAN
WebDAV directories. For further information, refer to the chapter §
☛ When no SLATE are paired, all the containers from 1 to 10 are empty and the respective synchroniz ation status have a grey background color.
Example with 4 SLATEs paired on the index 1, 2, 3 and 5:
.
.
http://<device_I P_addr>/

applicative user interface:

regular
R efresh
peripherals. Then, a hub.ppk content must be present in the respective
http://<device_I P_addr>/webui/
button.
Maintenance > Files.
13
,
G oogle Chrome Mozilla Firefox
. This pane allows to:
/.output/< slate_ index >/
,