4. Parts Of The Machine
Cooling duct
Curved duct
caster
5. Installation
Installation of the curved duct:
Please make the convex part of the curved duct point to the concavo part of the bending base
and insert it, then turn the duct in counterclockwise to lock.
Installation of the cooling duct:
Slide the fringe of cooling duct to the slot of curve duct, then turn the cooling duct clockwise
to lock. Please make sure the joint is connected well before use.
Releasing-locking Ring
Water tank:5L
LOCK
Convex Part
UNLOCK
Cold wind exit
Heat duct
Convex Part
Concavo Part
Bending Base
Power wire
Cooling Duct
Curved Duct
Releasing-locking Ring
Concavo Part