Advertisement
MANUAL - COLD AIR DUCT / HEAT-REMOVAL DUCT FITTING
Duct Elbow
Insert into
the Entrance
*After the insertion,
rotates 180º
Black Line
Cold Wind Export
1. The elbow inserts the entrance alignment the black line of the cold wind export and press in, revolving 180°.
2. Fit the recess of the elbow into the convex of the duct, then turn it anti clockwise until it stops.
*Note - Please do not add other accessories, or fit extended duct on the cold air duct to avoid damage.
3. How to install the heat-removal duct : The heat-removal duct socket uses 4 ST4x12 bolts to fix on the heat-removal mouth.
UNINEX.COM
800.864.3288
PARTS OF THE MACHINE
Duct Cap
Cold Air Duct
Particle Filter
Drain Tank (9L)
Cooling Duct
Recess
Convex Part
Do not cover to the air outlet of cold air duct.
When inserting the heat-removal duct, please note the heat-removal mouth recess.
CONTACT US FOR PURCHASE OR RENTAL (Click Here)
Duct Elbow
Heat-Removal Mouth
INSTALLATION
Heat-Removal Duct
Heat-Removal Duct Socket
Operation Panel
Swing Switch
High
ON
Low
Off
Power
OFF
Revolving Switch
Swing Switch
Caster Wheel
Heat-Removal
Duct Socket
Bolt Hole
Insertion
Advertisement
