Advertisement
Duct Cap
Cold Air Duct
Particle Filter
MANUAL - COLD AIR DUCT / HEAT-REMOVAL DUCT FITTING
Duct Elbow
Insert into
the Entrance
*After the insertion,
rotates 180
Black Line
Cold Wind Export
1. Installation of the curved duct: Please make the convex part of the curved duct point to the concave part
2. Installation of the cooling duct: Slide the fringe of cooling duct to the slot of curve duct,
then turn the cooling duct clockwise to lock. Please make sure the joint is connected well before use.
3. Installation of the heat-removal duct and socket: The heat-removal duct socket uses 4 ST4×12 bolts to fix on the heat vent.
UNINEX.COM
800.864.3288
PARTS OF THE MACHINE
Pull it out
Cooling Duct
Recess
Convex Part
of the bending base and insert it, then turn the duct in counterclockwise to lock.
When heat-removal duct insertion heat-removal duct socket, please note reliably.
When inserting the heat-removal duct, please note the heat-removal mouth recess.
CONTACT US FOR PURCHASE OR RENTAL (Click Here)
Heat-Removal Duct
Drain Tank (5L)
Heat-Removal
Duct
Insertion
Heat-Removal
Duct Socket
INSTALLATION
Duct Elbow
Heat-Removal Duct Socket
Choice Switch
High
Low
Off
Power
Drain Hose
Heat Vent
Advertisement
