Advertisement
PARTS OF THE MACHINE
Cooling Duct
Particle Filter
Curved Duct
Operation Switch
Handle
Power Cord
Water Tank Covering Panel
Mesh Grill Cover For Fan / Heating Outlet
Grounding
Water Tank (3L)
Screw
MANUAL - COLD AIR DUCT FITTING
Cooling Duct
Bending Duct
Releasing-Locking
Recess
Ring
Convex Part
Lock Out
Bending Duct
Convex Part
Support
Lock In
Concave Part
INSTALLATION
1. Installation of the curved duct: Please point the convex part of the bending duct to the concave part of the bending base
and insert it, the rotate the releasing-locking ring to fix the bending duct.
2. Installation of the cooling duct: Slide the fringe of cooling duct to the slot of curve duct, then turn the cooling duct
clockwise to lock. Please make sure the joint is connected well before use.
CONTACT US FOR PURCHASE OR RENTAL (Click Here)
UNINEX.COM
800.864.3288
Advertisement
