Parts Of The Machine; Installation - UNINEX KoolBase MSC1800NE User Manual

4. PARTS OF THE MACHINE

Operation Switch
Filter
Condensation Tank (3L)

5. INSTALLATION

• INSTALLING THE CURVED DUCT
Line up the nubs on the curved duct with slot on the cold air exit. Turn locking ring until lt is locked
position.
• INSTALLING THE COOLING DUCT
Slide the cooling duct raised nub in to the slot of the curved duct. Then turn clockwise to lock.
Make sure the duct is connected properly before using. When adjusting the direction, turn the curved
duct instead of the cooling duct.
Raised Nub
Slot
Notch
Cooling Duct Base
Caster Wheel
Curved Duct
Cold Air Exit
Cooling Duct Installation
Cooling Duct
Curved Duct
Exhaust
Cooling Duct
Releasing-Locking Ring
KoolBase
7
Unlock Lock
Curved Duct Installation