Routing The Blower Belt Into The Blower Assembly; Installing The Blower Assembly - Toro Z Master Z500 Series Operator's Manual

5
Installing the Bagger
Assembly
Parts needed for this procedure:
1 Bagger assembly
2 Clevis pin
2 Hairpin cotter
Procedure
1. Install the bagger assembly onto the bagger
mounting bracket
2. Install the 2 clevis pins into the bagger assembly
and bagger mounting bracket. Secure it with 2
hairpin cotters (Figure
Figure 10
1. Hood assembly
2. Clevis pin
(Figure 10).
10).
3. Hairpin cotter
4. Bagger mounting bracket
6
Routing the Blower Belt
into the Blower Assembly
Parts needed for this procedure:
1 Blower belt (from the Blower and Drive Kit)
Procedure
1. Install the belt around the blower pulley
11).
2. Install the spring to the idler arm and the peg on
the blower assembly
1. Idler pulley
2. Mower-deck pulley
3. Spring
g007702
10
(Figure 11).
Figure 11
4. Peg
5. Belt
6. Blower pulley
(Figure
g003398