7.
Install the lower tube into the upper tube
22).
Figure 22
1. Lower tube
8.
Slide the lower tube onto the boot and latch
them together
(Figure
Note:
There is a latch on the top and bottom
of the blower housing.
(Figure
g003424
2. Upper tube
23).
1. Blower assembly
2. Lower tube
9.
Make sure that the mower deck is in the lowest
height-of-cut position and the mark on the upper
tube is still positioned against the protruding
rubber seal.
Check to make sure that the mark from
21
is still in place.
15
Figure 23
3. Latch
g003423
Figure