Table Of Contents - Toro Z Master Z500 Series Operator's Manual

Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
and Figure 2 identifies the location of the model and
serial numbers on the product. Write the numbers in
the space provided.
1. Blower model and serial number location
Model No.
Serial No.
© 2020-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
www.Toro.com
Figure 1
Figure 1
1. Bagger model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 3), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
g003368
worthy of special attention.
Contents
Safety ....................................................................... 3
Safety and Instructional Decals .......................... 4
Setup ........................................................................ 5
1 Preparing the Mower........................................ 6
2 Installing the Bagger Mounting Bracket ............ 6
3 Installing the Handle Assembly ........................ 8
4 Tightening all Mounting Bolts ........................... 9
5 Installing the Bagger Assembly ........................ 9
6 Routing the Blower Belt into the Blower
Assembly ...................................................... 10
7 Installing the Blower Assembly....................... 10
8 Sizing the Upper Tube for 152 cm (60 inch)
Mowers with Gas Engines ............................. 12
9 Installing the Discharge Tubes ....................... 13
10 Installing the Belt Cover ............................... 16
2
Figure 2
Bagger Serial Number
Figure 3
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g007732
g000502