Cleaning The Bagger And Bags; Checking The Condition Of The Belt; Inspecting The Blower Belt; Greasing The Idler Arm - Toro Z Master Professional 7500-D Series Operator's Manual

Cleaning the Bagger and
Bags
Service Interval: Before each use or daily
Clean the bagger daily.
1. Wash the inside and outside of the bagger
hood, bags, tube, and the underside of the
mower deck. Use a mild automotive detergent
to remove dirt.
2. Remove matted grass from all parts.
3. After washing all the parts, let them dry
thoroughly.
Note:
With all parts installed, start and run the
machine for a minute to dry them.
Checking the Condition of
the Belt
Service Interval: Every 50 hours
1. Park the machine on a level surface.
2. Move the motion-control levers to the
N -L position.
EUTRAL OCK
3. Engage the parking brake.
4. Shut off the engine and remove the key.
5. Inspect the belt for damage or wear. Replace
the belt with one of the following:
Deck
60-inch deck
72-inch deck

Inspecting the Blower Belt

Service Interval: After the first 8 hours
Every 25 hours
Check belts for cracks, frayed edges, burn marks or
any other damage. Replace damaged belts.
Part No.
103-0866
103-0867

Greasing the Idler Arm

Service Interval: Every 25 hours
Grease the bagger belt idler arm
25 hours.
22
(Figure 28) every
Figure 28
g003455