Related Manuals for HOOKE ROAD MMR.20032
Summary of Contents for HOOKE ROAD MMR.20032
- Page 1 Tailgate Table MMR.20032 (1)Contents: (2)Tools required: A. Drill with 9.2-9.5mm Drill Bit; B. Pneumatic Riveting Nut Gun with 6mm Nut Chuck; C. 4mm HEX Socket Wrench;...
-
Page 2: Installation Time
(3)Installation time: About 40 minutes, 1-2 people might be needed for install. Install time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) (4)Installation instruction: Step 1: Find the locating paper and cut it along the line. Then paste the paper on the tailgate with tape. - Page 3 Step 3: Use the pneumatic riveting nut gun with 6mm nut chuck to install the four riveting nuts.
- Page 5 Step 4: Install the tailgate table with supplied bolts.
- Page 6 Step 5: The installation is complete. We hope you enjoy a wonderful off-road life with this quality product!
- Page 7 Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase.
Need help?
Do you have a question about the MMR.20032 and is the answer not in the manual?
Questions and answers