Related Manuals for Prominence Home Almadale 50330
Summary of Contents for Prominence Home Almadale 50330
- Page 1 56” CEILING FAN Owner’s Manual Model #50330 If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 9 a.m.- 5 p.m. Central time. 9245 • 040517...
- Page 2 PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Mounting Bracket 8. Optional Light Kit Housing 2. Downrod 9. Pull Chain Extension 3. Canopy 10. Blades (x 3) 4. Canopy Cover 11.
-
Page 3: Mounting Options
DIMENSION REFERENCE A. 13.75 in. B. 5.19 in. C. 2.40 in. MOUNTING OPTIONS Dual Mounting Options Downrod Mount Slope Ceiling Mount (Up to 16 degrees) Choose one of the following mounting options: Downrod Mount is best suited for ceilings 8 ft. or higher. For taller ceilings you may want to use a longer downrod (not included). - Page 4 SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan.
- Page 5 ASSEMBLY INSTRUCTIONS 1. Turn OFF the electrical power at the main fuse or circuit breaker. 2. Install the mounting bracket to the outlet box (not included) using the screws and washers provided with the outlet box. Warning: To reduce the risk of fire electric shock, or personal injury, mount to the outlet box marked “acceptable for fan support”...
- Page 6 ASSEMBLY INSTRUCTIONS 5. Install the ball end of the downrod into opening in the mounting bracket. Align one of the slots in the downrod with the tab in the mounting bracket. The downrod Mounting should not rotate in the mounting bracket if installed Bracket properly.
- Page 7 ASSEMBLY INSTRUCTIONS 9. Attach the pull chain extension to the pull chain. Pull Chain Extension 17. Restore the power at the main fuse or circuit breaker. OPERATING INSTRUCTIONS 1. The pull chain has four positions to control the fan speed. One pull is HIGH, two is MEDIUM, three is LOW and four turns OFF the fan.
- Page 8 OPTIONAL LIGHT KIT INSTRUCTIONS 1. To install the fan with an optional light kit, remove Fitter Plate the three fitter plate screws from the sides of the switch Screws housing and set aside for later. 2. Remove the pull chain assembly by twisting the pull chain ferrule counter clockwise.
-
Page 9: Troubleshooting
TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in installation, please contact customer service: 1-877-706-3267, 9 a.m.- 5 p.m. -
Page 10: Limited Lifetime Warranty
LIMITED LIFETIME WARRANTY To obtain Service, please contact the Service Department: 1-877-706-3267, 9 a.m.- 5 p.m. central time. Model Name: 56” Ceiling Fan Model No: 50330 - Brushed Nickel Subject to the limitations set forth below, Hong Kong China Electric appliance Company (HKC) warrants the fan motor for this ceiling fan to be free from defects in workmanship and material for the life of the product.
Need help?
Do you have a question about the Almadale 50330 and is the answer not in the manual?
Questions and answers