Related Manuals for Prominence Home 51452
Summary of Contents for Prominence Home 51452
- Page 1 52” CEILING FAN Owner’s Manual Models #51452, 51453, 51494 To obtain service, please contact the Service Department: , 8 a.m.-5 p.m. Central, Monday-Friday. 1-877-706-3267 9498 • 030920...
- Page 2 PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Canopy 11. Fitter Plate 2. Canopy Cover 12. Fitter Plate Screw (x3) 3. Mounting Bracket Screw 13. Motor Screw (x6) (x4) 14. Light Kit 4.
-
Page 3: Mounting Options
DIMENSION REFERENCE A. 12.92 in. B. 9.29 in. C. 6.74 in. D. 5.13 in. MOUNTING OPTIONS Two Mounting Options Two Mounting Options Downrod Mount Downrod Mount Angled Ceiling Mount (Up to 16 degrees) Angled Ceiling Mount (Up to 16 degrees) Choose one of the following mounting options: Closemount Installation is not available for this model. - Page 4 SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan.
- Page 5 ASSEMBLY INSTRUCTIONS 1.Turn OFF the electrical power at the main fuse or circuit breaker. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. Mounting 2. Remove the mounting bracket by removing the two Bracket Screw mounting bracket screws from the round holes in the canopy.
- Page 6 ASSEMBLY INSTRUCTIONS 5. Feed the wires coming from the yoke through the yoke cover, canopy and downrod. Canopy Yoke Cover Downrod Yoke 6. Insert the downrod into the yoke and reinstall the downrod pin and downrod clip. Then retighten the two set screws.
- Page 7 ASSEMBLY INSTRUCTIONS 9. Align the canopy over the loosened mounting bracket screws. Place the J-slot of the canopy onto the mounting Mounting Bracket Screw bracket screws and rotate clockwise. Secure the canopy with the two previously removed mounting bracket Canopy screws.
- Page 8 ASSEMBLY INSTRUCTIONS 13. Attach pull chain extensions to the pull chains. Note: When facing the reverse switch, the pull chain on the left controls the light and the pull chain on the right controls the fan. Pull Chain Extension 14. Turn ON the electrical power at the main fuse or circuit breaker.
- Page 9 OPERATING INSTRUCTIONS 1. Use the reverse switch, located on the light kit to optimize your fan for seasonal performance. Using a ceiling fan will allow you to raise your thermostat setting in summer and lower your thermostat setting in winter without feeling a difference in your comfort. Reverse In warmer weather, push the reverse switch left which Switch...
-
Page 10: Troubleshooting
TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 8 a.m.-5 p.m. -
Page 11: Limited Lifetime Warranty
To obtain Service, please contact the Service Department: 1-877-706-3267, 8 a.m.-5 p.m. Central, Monday-Friday Model Name: 52” Ceiling Fan Model No: 51452 - Espresso 51453 - Gun Metal 51494 - White The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser.
Need help?
Do you have a question about the 51452 and is the answer not in the manual?
Questions and answers