Hardware Specifications Warranty and Safety Instructions Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions Interface •...
Page 3
The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks appliance it was delivered with.
Page 4
Not all appliances support yellow and/or red LED colors. Depending on the appliance type, the status LED might be on by default and it might take some time during boot and installation to start either blinking or changing the color. Furthermore, the status LED might blink at different T900 Revision B 4 / 7...
Page 5
You may use the LCD display and the keypad to access certain appliance features. Use the up and down keys to navigate through the items of the main menu. The LCD menu features the following items from top to bottom: T900 Revision B 5 / 7...
Once set, this flag can not be deleted through the menu. next reboot When rebooted, the appliance will not start Barracuda OS, but ART instead. You may connect to the appliance by using the serial console or by SSH.
Page 7
Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the T900 and is the answer not in the manual?
Questions and answers