Graco 25F130 Instructions Manual

Vacuum-assist assembly tool

Download this manual

Instructions

Vacuum-Assist

Assembly Tool

For installing a fluid cover on sanitary Air-Operated Double Diaphragm (AODD) pumps. For

professional use only.

Kit 25F130

For models with 2 in. ports

Kit 25F131

For models with 2.5 in. ports

Kit 25F132

For models with 3 in. ports

Kit 25F133

For models with 3.5 in. ports

Important Safety Instructions

Read all warnings and instructions in this

manual and in your related equipment

manual before using the equipment.

Save all instructions.

3A8874A

Table of Contents

Page 1 Vacuum-Assist Assembly Tool 3A8874A For installing a fluid cover on sanitary Air-Operated Double Diaphragm (AODD) pumps. For professional use only. Kit 25F130 For models with 2 in. ports Kit 25F131 For models with 2.5 in. ports Kit 25F132 For models with 3 in. ports Kit 25F133 For models with 3.5 in.
Page 2: Table Of Contents
Contents Warnings ........2 Parts ........3 Setup .
Page 3: Parts
Parts Parts Setup Assemble Parts 1. Apply sanitary thread sealant to the air hose fitting (B). 2. Install the air hose fitting (B) to the outlet port cap (A). Securely tighten. 3. Apply sanitary thread sealant to the air hose adapter (C).
Page 4: Typical Setup
Operation Operation Typical Setup See F . 1. 1. Set the outlet port cap (A) on the outlet port (F) of the installed fluid cover. NOTE: Optional: Use a clamp to firmly hold the outlet port cap (A) in place. 2.
Page 5 Operation 3A8874A...
Page 6 With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.

25f13125f13225f133