Jamara CCX Pro Instructions Manual page 5

Charging The Batteries
If you use NiCad or NiHm rechargeable cells for your transmitter ensure that the cells are fully charged before using the system. Please be
aware that due to the self-discharge characteristics of this type of cells that they should always be fully charged prior to use. Please refer to
the battery manufacturers recommendations regarding charging current etc.
Controls
5
6
7
Use only a high quality charger which is suitable for this type of cells such as our item 15 0004.
For further information please contact your local dealer. Once charging is complete, always dis-
connect the batteries from the charger and unplug the charger from the mains supply.
Remove the batteries from the model and transmitter if you do not intend to operate it for a
longer period of time. To charge teh transmitter batteries please proceed as follows:
1. Fit the batteries observing the correct polarity.
2. Plug the charger into the household mains.
3. Connect the charging cable to the transmitter.
4. Remove the charging cable and unplug the charger as soon as the batteries are full.
Warning!
Remove the battery hatch cover whilst charging!
Right - side view
1 1. 2,4 GHz Antenna
2. Steering Wheel
3. 3 channel
4. Battery Hatch
2
5. Dual Rate channel 1
6. Trim channel 3
Rear View
3
7. ON/OFF Switch
Left - side view
8. Connection for
simulator cable
9. Charging socket
4
A. Throttle Lever
8
9
A
I
J
Programming Panel
B. LCD display
C. Back
D. Binding Button
E. Selection for sub-menu
F. Confirmation ( right / left)
G. Trim channel 2 back
H. Trim channel 2 front
I. Trim channel 1 left
J. Trim channel 1 right
Thanks to the logical and well thought out lay-out of the Program-
ming Panel and the positioning of the switches and LEDs the CCX
Pro 2,4 GHz transmitter can be quickly and simply programmed. All
channels can be trimmed and the direction changed.
Furthermore the transmitter is equipped with a Dual Rate, a EXPO-
and ABS-Function.
B
C
D
E
F
G
H
5