Jamara CCX Pro Instructions Manual page 8

Switching On
1. Plug in all of the components.
2. Switch the transmitter on.
3. Connect the receiver battery to the receiver.
4. Check that the LEDs on both the transmitter and the
receiver illuminate solidly.
5. The system is now correctly switch on and operating
and can now safely be used.
Switching Off
1. Disconnect the receiver battery
2. Switch off the transmitter
8
Switching
on
1. Switch the
transmitter on
Switching Off
1. Switch off
the receiver
2. Switch the
receiver on
2. Switch off
the transmitter