Jamara CCX Pro Instructions Manual page 13

Operating The Model
Steering
Throttle Lever
This function is used to steer the model and turning the steering
wheel will make the models wheels to turn in the relevant direc-
tion. Turning the wheel to the right will make the models wheels
turn to right when viewed from above as illustrated. Moving the
wheel to the left will cause the wheels to turn to the left.
By operating the relevant switch (6) on the programming panel the
direction in which the steering moves can be reversed if required.
In addition, the transmitter is equipped with a Dual Rate function.
When this function is activated the wheels of the model will move
less relative to the movement of the transmitters steering wheel
around the middle position. This will allow the model to be steered
with more precision however if this function is used the total throw
will still be available for tight cornering when the steering wheel is
moved to the end of it's range.
This function is used to control the models speed both forwards
and in reverse as shown in the illustration to the left. If the lever is
pulled back towards the transmitter grip the model will accelerate
forwards.
If the lever is pushed away from the transmitter grip the model
will first brake and then accelerate in reverse. This is providing that
the model is fi tted with a Speed Controller which supports these
functions.
13