Jamara CCX Pro Instructions Manual page 12

Functions
EXP
ABS
12
With this setting you can change the servo sensitivity, without af-
fecting the total servo way.
Output value is 0%
Adjustment of -100 - 100%
Press „Enter" and select „EXP" on the menu. The channel will flash.
Press „END" to enter the setting of the channel. Select with the ro-
tary knob to set the value and press Enter to confirm the value.
The servo sensitivity increases exponentially. It determines the curve
of the reaction of the respective channel in relation to the input of
the transmitter (steering wheel, throttle).
With this setting you can determine if your model is to have the gas
or brake servo on the ABS function. This braking assistance helps to
prevent the wheels from locking.
OFF: The ABS function is over.
SLW: Slow pulses
NOR: Average Impulse
FST: Fast Impulse
Tip: The setting can vary from servo to servo, and should be
tailored to each servo.
Press „Enter" and select „ABS" in the menu. The setting is flashing.
Select with the rotary knob to set the value and press Enter to con-
firm the value.