Jamara CCX Pro Instructions Manual page 10

Functions
MODEL
NAME
REV
10
You can store up to 10 models in the transmitter.
Each memory can be set individually for each model.
The default setting of the transmitter shows „no. 0 „FS0".
In the picture you see the space „no. 8" and the model name
„ACB".
Switch the transmitter on and press „Enter".
By turning the enter button in the menu „Model" to the left or
right, you can choose the model of your choice. Press the Enter
button to confirm the model.
To exit the menu, press „BACK".
In this menu you can assign a name to each model (max. 3 cha-
racters).
„Model No." = model number
„ACB" = shortcut
Press „Enter". To select the option „Name" turn the enter button.
The first letter (here A) starts to flash. By turning the Enter button
you can select a letter. Press the „End" key to switch to the next let-
ter. Repeat the process for the third letter. Once you have entered
your code, confirm by pressing the „Enter" key.
To exit the menu, press „BACK".
Servo reverse direction.
Channel: Channel number 1 to 3.
REV: Reverse servo direction
NOR: Normal servo direction
Press „Enter". Turn the knob to get to the desired channel. Press
„END" to change the setting. The setting is flashing, now select the
button „REV" or „NOR" and press Enter.