Fan Installation - AZZA LEGIONAIRE CSAZ-470 User Manual

Fan Installation

CONNECTOR
Reset (LED)
①
ARGB LED 5V (3pin) female connector
②
Fan Connector
③
Fan Connector PWM (4pin)
④
SATA
⑤
⑥
ARGB LED 5V (3pin) male connector
Logo ARGB LED connector
⑦
※Before the fan starts,please make sure the PWM connector
※Press the LED button to cycle through different RGB lighting modes, all ARGB devices are controlled by the
LED button. (make sure the other 3pin ARGB devices are connected with
insert the motherboard, hold the LED button for 3 seconds to switch the RGB control function between
②
※Ensure
motherboard RGB software and LED button.
1
2
4
3
LED
S/W (2pin) Button
The 5V/3pin ARGB socket of the motherboard
The master Fan connect to the sub-fan
CHA_FANx socket of the motherboard
Power Supply
Other 5V/3pin ARGB devices
The last sub-fan female connector
3
5
7
6
CONNECTION
and SATA connector
④
)
⑥
Front panel logo
7
each are connected.
⑤