Cisco MGX-FRSM-2CT3 Configuration Manual page 21

•
Standards-based management tools. Each FRSM supports SNMP, TFTP for configuration and
statistics collection, and a command line interface. The Cisco WAN Manager application
provides full graphical user interface support for connection management. The CiscoView
application provides equipment management.
•
MGX 8800-series network management functions, including image download, configuration
upload, statistics, telnet, UI, SNMP, trap, and MIBs.
•
OAM features: OAM F5 AIS, RDI, end-to-end or segment loopback as well as LMI and
Enhanced LMI (ANNEX A, ANNEX D, Strata LMI).
•
Hot swappable redundancy (see sections for individual FRSM card types).
•
CLLM (router ForeSight and NNI ForeSight operation).
•
Resource partitioning at the card level or port level.
•
Bit error rate test (BERT) functions for all card types except the HSSI card types. For a
description of BERT on the MGX-FRSM-2T3E3, see the forthcoming section "Bit Error Rate
Testing on an Unchannelized T3 or E3 FRSM". Running a BERT session on an
MGX-FRSM-2CT3 or an eight-port FRSM requires a set of MGX-SRM-3T3s in the system. For
a description of BERT on these cards, see the section titled "Bit Error Rate Testing Through an
MGX-SRM-3T3."
MGX-FRSM-2CT3 Features
The specific features are:
•
Up to 1000 user-connections
•
Two T3 lines
•
Up to 256 logical ports
•
Logical port speed from DS0 56 Kbps through DS1 1.536 Mbps
•
Support for five Class of Service (CoS) queues (high priority, rt-VBR, nrt-VBR, ABR, UBR)
•
1:1 redundancy through Y-cable redundancy (no Service Resource Module required)
MGX-FRSM-2T3E3 Features
The specific features are:
•
Up to 1000 user-connections
•
Two T3 or E3 lines coinciding with two logical ports
•
ADC Kentrox and Digital Link methods for supporting fractional T3 or E3 ports
•
Maximum possible number of DLCIs per port by using the Q.922 two-octet header format
•
Support for five Class of Service (CoS) queues (high priority, rt-VBR, nrt-VBR, ABR, UBR)
•
1:1 redundancy through Y-cable redundancy (no Service Resource Module required)
•
Fractional T3 speeds available through either the Digital Link or ADC Kentrox method
Frame Service Module Features
Card and Service Configuration 6-21