Emulator Connections - Oki Dr.63514 User Manual

Chapter 3. Setting Up and Starting Up

1.3 Emulator Connections

Connect the Dr.63514 in-circuit emulator to its accessories and peripherals as shown in the figure.
Host computer
Note 1
Low EPROM
High EPROM
Note 2
Grounded AC outlet
_____________________________________________________________________________________________________
n Note 1 n
The host computer and the RS232C cable are not required when operating the emulator in
evaluation mode.
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________
n Note 2 n
There is no need to insert the user program EPROMs when operating the emulator in
emulation mode.
_____________________________________________________________________________________________________________________
3-6
RS232C
cable
DC9V
AC power pack
AC power cable
Positive power supply
(100 to 240 V AC)
Figure 3-1 Connections for Emulation
Dr.63514
Probe cable
PROBE
User cable
USR
+
0.9 to 5.5 V
-
User application system
VDD
VSS