Chapter 1. Overview
3. Configurations
The emulator is used in the two configurations shown below.
(1) Emulation
This configuration is for high-level debugging using a dedicated debugger running on a development
host.
Host computer
RS232C cable
User cable
Dr.63514
User application
In-Circuit
system
Emulator
AC power pack
Probe cable
Dedicated
debugger
(2) Evaluation
This configuration is for stand-alone execution of the user application program from EPROMs.
Dr.63514
User application
In-Circuit
system
Emulator
User cable
AC power pack
Caution
Use only the cables and other accessories provided.
Using non-compatible parts risks fire and breakdown.
1-4