Code Memory
16 bits
Figure 2-5 Data Operations between Code Memory and EPROMs
_______________________________________________________________________________________________________________
n Note 1 n
Stand-alone, evaluation operation does not use code memory. The user application program
executes directly from the EPROMs in the EPROM sockets.
_______________________________________________________________________________________________________________________________
2.4.3 Displaying/Changing/Moving Code Memory
Displaying/changing code memory can be performed at the instruction code level or instruction
mnemonic level. Moving code memory can be performed at the instruction code level.
2.4.4 Code Memory Backup
A large capacitor inside the emulator maintains code memory contents for up to 24 hours (one day).
_______________________________________________________________________________________________________________
n Note 1 n
The backup interval depends on how long the capacitor has been charged—that is, how long
the emulator power has been on—and varies with ambient conditions.
_______________________________________________________________________________________________________________________________
Load
Verify
HIGH side
(higher 8 bits)
Chapter 2. Functions
LOW side
(lower 8 bits)
2-23