Setting The Clock - Sony CMT-AH10 Instruction Manual & Warranty

Machine Translated by Google
set the clock
The clock display on this unit remains "– –:– –"
until the clock is set. If you set the clock, the
recording date and time will be automatically
recorded when you record on the MD .
1 until the year digits flash
Hold down the CLOCK/DELETE button . The
last two digits of the year will flash.
2 Set the year, month, and day.
1Press the number/letter buttons to set the
year, and press the YES•ENTER/MENU
(ENTER on the main unit ) button. The
"month" number flashes. 2Press the
number/letter buttons to set the month, and
press the YES•ENTER/MENU (ENTER on
the main unit ) button. The "day" number
flashes.
24 connection and preparation
CLOCK/DELETE
Number/letter buttons
>10 AM/PM
NO CANCEL
YES ENTER/
MENU
3Press the number/letter buttons to set the
date, and press the YES•ENTER/MENU
(ENTER on the main unit ) button. The
"hour" and "minute" digits flash.
3 Set the time.
1 Press the >10 AM/PM button on the number/
letter buttons to set "Am" or "Pm" .
2Press the number/letter buttons in order of
"hour" and "minute". Example) At 8:45,
press 8ÿ4ÿ5 in order.
4 Press the YES•ENTER/MENU ( ENTER on the
unit) button. The clock runs from 00 seconds.
If you make a mistake on the
way, press the NO•CANCEL (CANCEL on the main
unit) button . The last setting will be lost, so please set
it again.
To display the current date and time,
press the CLOCK/DELETE button during stop,
playback, or manual recording (pages 45, 85) . Press
again to return to the original display.
Note
When the power cord is disconnected, the clock display
may return to "– –:– –". In that case, set the clock again.
Tip • At the
time of purchase, the time display is set to 12 hours.
Midnight : "Am12: 00" Noon : "Pm12:00" • To
switch to 24-hour display, use the menu operation.
(page 49), select "Useful Functions" – "Clock
Display Settings" – "24-Hour Display", then press
the YES•ENTER/ MENU button to confirm.