Using By Connecting To A Computer; Connecting To A Computer - Sony CMT-AH10 Instruction Manual & Warranty

Machine Translated by Google
Use by connecting to a computer
Things you can do by

connecting to a computer

Note
Before connecting this unit to a computer, be sure
to use the included CD-ROM to install the software
"SonicStage". For details on how to install the
software and the operating environment of your
computer, see the separate "Software Installation/
Basic Operation Guide".
By connecting this unit to a computer, you can do the
following. • Music data can be transferred between the
MD of this unit and a computer.
Transfer files to
each other For details, refer to the separate "Software
Installation/Basic Operation Guide" or SonicStage
Help. • Listening to the sound of the connected
computer (page 99) • Saving data other than music data
to the MD (page 100)
Just a word
When using software to play back tracks on the disc you are
using in Hi-MD mode inserted in this unit, the message "When
you play back a Hi-MD disc , the sound will be heard through
your computer's speakers." appears. However, if you use the
USB speaker function of this unit, you can hear the playback
sound from the speakers or headphones connected to this unit.

98Using by connecting to a computer

connect to computer
Follow the steps below to connect the unit and the
computer.
Note
When you unplug the dedicated USB cable or operate the
unit while it is connected to a computer, the message "Warning
to remove the device" will be displayed on the computer, but
this is not a problem. Click "OK" to clear the display .
When using Windows ME/98SE Connect this
unit to a computer with the disc mode set to " Hi-MD" (default
state) and insert a 60/74/80 minute blank disc. , the disc may
become a Hi-MD format disc without recording anything .
to USB port
1 Start your computer.
2 Press MDZ to insert an MD into this unit.
be.
This step is not necessary if you only use the
USB speaker function.
to USB port
Dedicated
USB cable