Table of Contents
Advertisement
Machine Translated by Google
Tape part
Protecting important recordings - If you break the
accidental erasure prevention tab, recording will not be possible, so you can
prevent the mistake of accidentally erasing the recorded contents. Even if
the tab is broken, you can record again by covering the hole with cellophane
tape.
Claw on side B
When using the tape for a long time, a tape
that exceeds 90 minutes is convenient for long-term use, but it is
thin and stretches easily. Note that repeated jerky running,
stopping, fast-forwarding, and rewinding may cause the tape to get
caught in the machine.
head cleaning
After long periods of use, the head may become dirty, resulting in
poor sound, interruptions, or the inability to record. To enjoy stereo
recording and playback with better sound, clean the head, capstan
and pinch rollers with a commercially available cotton swab and
cleaning solution after about 10 hours of use .
Degaussing the recording/
playback head If the recording/playback head is used for a long
period of time, or if a magnetic screwdriver comes in contact with
the head, the head will become magnetized, causing a rumbling
noise to occur during recording or playback. If this happens, use a
commercially available head demagnetizer to degauss the
recording/playback head.
Side A
Claw on side A
Main Specifications
CD player part
model
compact disc digital audio system
Number of channels: 2 channels Wow and
flutter measurement limit (JEITA*) Frequency response: 20
to 20,000 Hz +1/-2 dB
(JEITA*)
MD deck
model
Minidisc digital audio system
Disc Minidisc Recording
method Magnetic field modulation overwrite method
Reproduction reading method
Non-contact optical reading (semiconductor
laser)
laser
Semiconductor laser
(ÿ=790nm)
When using HMD1G (1GB): up
Recording playback time
to 34 hours in stereo
When using MDW-80 in Hi-MD
mode : Stereo maximum 10 hours
When using MDW-80 in MD
mode : Monaural maximum 160
About 350rpm-3600rpm
number of revolutions
(CLV and CAV) error
correction method Hi-MD:
MDs:
ACIRC (Advanced
Sampling frequency 44.1kHz
(Hi-LP)
10 minutes
(Hi-LP)
minutes (playback only) Stereo
maximum 320 minutes
(LP4)
LDC (Long Distance
Code)/BIS (Burst
Indicator Subcode)
Cross Interleave Reed
Solomon Code)
Continued on next page
Other 119
others
Advertisement
Table of Contents
