Table of Contents
Advertisement
Machine Translated by Google
MDEdit
before editing
The following editing operations can be performed on
the MD of this unit. You can enjoy various playback
modes (pages 60-64) by naming songs and creating
groups .
• Assigning a name Page 71 •
Creating a group Page 74 • Deleting
a group Page 75 • Changing the order of
songs Page 76 • Deleting songs and groups
Page 78 • Dividing songs Page 80 •
Combining songs into one Page 80 •
Initialize the disk page 81
please note
• Play-only discs cannot be edited. • Close
the accidental erasure prevention knob (page 118).
di).
• If "Writing system file" flashes after editing, the
edited information is being recorded to the disc.
Do not remove the power cord or move the machine.
It may not be recorded correctly.
70 MDEdit
Group structure and how it is recorded
Disk disk before group setting
3 1 2 4 5 6 7 8 12 131415
1 to 5 tracks to "Group 1"
m8~12 tracks to "Group 2"
Tracks 13-15 are in "Group 3" and
tracks 6 and 7 are not included in the group
Disk disk after group setting
group 1 group 2 group 3
1 2345 6 7 1 2345 1 2 3
Songs that are not in a group are considered to belong
to "Group – –".
A maximum of 255 groups can be created with a disc
used in Hi-MD mode, and a maximum of 99 groups can
be created with a disc used in MD mode.
How group information is recorded When
editing using the group function, the group information is
automatically recorded on the MD as the "disc name".
Specifically, the following character string is written in the
disc name recording area.
example)
one two three
1 Disc name: "Favorites"
Group name for songs 21 to 5: "Rock"
Group name for songs 36 to 9: "Pops"
Therefore, I used the group function to edit
If the MD is read by a device that does not support the
group function or a device that does not operate the
group function, the character string above will be
displayed as the "disc name".
Advertisement
Table of Contents
