Sony CMT-AH10 Instruction Manual & Warranty page 105

Machine Translated by Google
symptoms
"Read error" is displayed even though a CD
is inserted.
Sound skips.
There is noise.
MD department
symptoms
"Recording error", "Reading error ", "TOC
data error " is displayed and no operation is
accepted.
Cannot play.
The disc cannot be played on other devices.
stomach.
Check item
• The CD is very dirty.
cClean . (page 118)
• There is dew (water droplets) on the
lens. c Remove the CD and leave the front panel open for several
hours. • CD-R/CD-RW discs that have not been finalized (processed
so that they can be played on a normal CD player ) cannot be played.
• For CD-R/CD-RW, the disc and the recorder used for recording
Playback may not be possible depending on the
state. • Music discs with copyright protection technology may not be
playable . (10 pages)
• Depending on the CD, the sound may skip. turn down the volume
stomach.
• The CD is very dirty.
cClean . (page 118)
• The CD has scratches.
c Replace the CD. • Place
in a place free from vibration. •
With CD-R/CD-RW, the reproduced sound may be choppy or noisy depending on the
conditions of the disc and the recorder used for recording.
Check item
• The MD is dirty or damaged. c Replace with a
new MD.
• There is condensation (water droplets) on the internal lens.
c Remove the MD and leave it for several hours with the front panel open.
• The MD is inserted in the wrong
direction. c Insert the MD label side up. c Insert
the MD in the direction of the arrow. • Insert an
MD on which nothing has been recorded. ("This is a blank disc" or "Nothing is
recorded" is displayed.) cReplace the MD with a recorded one.
• You tried to play on a device that does not support Hi-MD.
c Hi-MD discs can only be played on devices that support Hi-MD.
I can do it.
I'm in
trouble
when
Continued on next page
Troubleshooting 105