Advertisement
NCA-2522 User Manual
OS Watchdog Timer
OS Wtd Timer
Timeout
OS Wtd Timer Policy
Serial Mux
System Event Log
View FRU
information
Bmc self test log
BMC network
configuration
View System Event
Log
BMC User Settings
BMC Warm Reset
If enabled, it starts a BIOS timer which can only be shut off by
Enabled
Management Software after the OS loads. It also helps verify
that the OS is successfully loaded or follows the OS Boot
Disabled
Watchdog Timer policy.
5 minutes
10 minutes
Configure the length of the OS Boot Watchdog Timer. Not
available if OS Boot Watchdog Timer is disabled.
15 minutes
20 minutes
Do
Configure how the system should respond if the OS Boot
NothingReset
Watchdog Timer expires. Not available if OS Boot Watchdog
Power Down
Timer is disabled.
Power Cycle
Enable
Press <Enter> to enable or disable Serial Mux configuration.
Disable
NA
Press <Enter> to change the SEL event log configuration.
NA
Press <Enter> to view FRU information.
NA
logs the report returned by BMC self test command
NA
Configure BMC network parameters.
NA
Press <Enter> to view the System Event Log Records.
NA
Press <Enter> to Add, Delete and Set Privilege level for users.
NA
Press <Enter> to do Warm Reset BMC.
83
Advertisement
