Advertisement
NCA-2522 User Manual
The system supports the placement of one IPMI module card, allowing system administrators to remotely
manage and monitor system health. Follow the steps below for installation.
The IPMI Module Kit includes:
1x IPMI Module Card
3x Stainless Steel Standoff Pillar Studs
Screw pack
1. Power off the system and open the cover.
2. Locate the IPMI socket and pillars on the
motherboard.
3. Unscrew the three (3) screws on the
motherboard.
4. Then, screw on the three (3) standoff
pillar studs.
IPMI
Module Card
Pillar Studs
IPMI Socket
28
Screw
Standoff
Pack
Advertisement
