Usb Port - GE PACSystems RX3i User Manual

Chapter 2. LED Operation and Connectors

USB Port

The USB port, located on the bottom of the RX3i CEP Carrier, can be used to connect to a computer for
firmware updates for the RX3i CEP Carrier. The USB port accepts a standard USB cable (USB Micro B Male to
USB Type A Male, not included). The port must be set up before using it, as described in the Operations
chapter.
Note: The USB port is for firmware upgrades only. It is not intended for permanent connection.
22 PACSystems* RX3i CEP PROFINET Scanner GFK-2883E