Compliance; Contact Data - oxycom IntrCooll Std. Manual

Compliance

Contact data

6
For the EU market the machine has been tested and complies with:
- the machinery directive 2006/42/EG
- the EMC directive 2014/30/EU
- the low voltage directive 2014/35/EU.
- the pressure equipment directive 97/23/EC
- the restriction of Hazardous Substances (ROHS) 2011/65/EU
- VDI 6022 Part 1 (January 2018)*
- VDI 3803 (May 2020)*
* When operated according to the required hygiene guidelines.
The product also complies with all applicable CE-directives and therefore has a CE
plate.
Additional safety features on the IntrCooll®
In addition to the usual general safety features, the IntrCooll® has several extra
safety features to comply with the VDI 6022 Part 1 standard.
The most important:
- The seals are made of Polyethylene (PE) and are of the closed cell type. The
seals are tested according to DIN EN ISO 846 and fulfill the requirements from
the VDI 6022 Part 1 in terms of microbial inertness.
- Parts of the housing that are exposed to water are covered with a powder
coating.
The instructions in this document do not take into account different national
regulations and laws. When operating the machine, it is the sole responsibility of
the user to make sure that all applicable local laws and regulations are obeyed.
If you have any questions or need further details on specific matters concerning
the equipment, do not hesitate to contact us:
Oxycom Fresh Air B.V.
P.O. Box 212
8100 AE Raalte
The Netherlands
Tel: +31 (0)572 349 400
E-mail: service@oxy-com.com
Website: www.oxy-com.com