Permissible Multiengines - Stihl RL-MM Instruction Manual

English
Aerating the Lawn
: Start the engine.
: Operate the aerator at no less than
half throttle, or at full throttle.
: Choose a working speed that
produces the required aerating
depth without lugging down the
engine.
: Do not operate the machine at a
speed faster than normal walking
pace.
: Do not push the blades into the
ground.
10
Cleaning the blades
Pieces of grass or roots may become
tightly wound around the tool mounting
during aerating work.
Clean the blades as follows:
– Shut off the engine.
– Wear protective gloves.
– Pull the spring clips out of the shaft.
– Pull the blades off the shaft.
– Clean residue of roots, plants and
soil off the blades and mounting.
Refit the blades as described in chapter
"Mounting the MultiTool".
Always stop the engine and
disconnect the spark plug boot before
doing any maintenance, repair or
cleaning work on the machine.

Permissible MultiEngines

Only MultiEngines which have been
supplied by STIHL or specially approved
for use with this MultiTool may be used.
This MultiTool may only be used in
combination with STIHL MM 55.
RL-MM