1. Manuals
  2. Brands
  3. RH Baby&child Manuals
  4. Baby & Toddler Furniture
  5. WILKES TODDLER BED CONVERSION KIT INST
  6. Instructions manual

RH Baby&child WILKES TODDLER BED CONVERSION KIT INST Instructions Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
2900 North Macarthur Dr. Tracy,
CA95376, USA
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING: Read all
instructions before assembling this
product. KEEP INSTRUCTIONS
FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include
the product model number, color, and a brief description of the part. Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth.
Blot spills immediately and wipe with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original
hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
NOTE: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
tighten. Use wax or soap on all bolts to facilitate assembly
All Restoration Hardware cribs are designed to meet the highest safety
standards and comply with all U.S. and Canadian cribs and cradles regulations.
1
3
-
of a turn. After crib is completely assembled, return to each bolt and
2
4
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WILKES TODDLER BED CONVERSION KIT INST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RH Baby&child WILKES TODDLER BED CONVERSION KIT INST

Summary of Contents for RH Baby&child WILKES TODDLER BED CONVERSION KIT INST

  • Page 1 All Restoration Hardware cribs are designed to meet the highest safety standards and comply with all U.S. and Canadian cribs and cradles regulations. Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 2900 North Macarthur Dr. Tracy, CA95376, USA www.rhbabyandchild.com Distributed in Canada by:...
  • Page 2 IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS WARNING: ENTRAPMENT / STRANGULATION HAZARD Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child.
  • Page 3 WARNING: ADULT ASSEMBLY ONLY, OWING TO THE PRESENCE OF SMALL PARTS, SHARP POINTS AND EDGES. CAUTION TODDLER BED: THE MINIMUM AGE SHALL NOT BE LESS THAN 15 MONTHS AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50LBS. (22.7 KG). THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING MINIMUM DIMENSIONS OF 51-5/8 IN.
  • Page 4 ASSEMBLY INSTRUCTIONS STEP #1. FRONT RAIL PANEL DISASSEMBLY STEP #1.1: Remove the front rail panel of the crib by loosening all the bolts installed, as in DETAIL A. STEP #1.2: Gently tilt the crib and release the bolts underneath the metal brackets holding the stabilizer rails, as in DETAIL B.
  • Page 5 STEP #2. TODDLER RAIL ASSEMBLY. DETAIL C (DD) STEP #2.1 On inside face of both side rail panels there is a cavity for the hook and a pre-installed nut for the Allen bolt to pass through, which corresponds to the hooks on both ends of the toddler rail and hole with holes pre-drilled.
  • Page 6 STEP #3 MATTRESS SUPPORT HEIGHT ADJUSTMENT DETAIL E NOTE: If mattress supports is not in the lowest position. STEP #3.1 Loosen and remove all hardware (BB) on both sides of the frame of mattress support. STEP #3.2 Re-install the bolt on the third hole of the frame through the hole on the arm support.
  • Page 7 STEP #4 INSTALLATION OF STABILIZER RAILS INTO THE SIDE PANEL DETAIL G STEP #4.1 On inside face of both side rail panels are pre-installed metal brackets, designed to hold the stabilizer rails. Set both ends of the stabilizer rails into brackets, as illustrated in DETAIL G. STEP #4.2 Once the stabilizer rails are set, gently tilt the toddler bed and fasten the stabilizer rails with bolt, plain washer and lock...

Table of Contents