Control Panel - Atlas Copco XAS 185 CD7 T4F HOP Instruction Manual

CONTROL PANEL

Reference Name
START BUTTON
This button will initiate the starting
sequences if the controller is in Ready To
Start Sequence, or will re-enter the normal
running sequence when in Cooldown
Sequence.
STOP BUTTON
This button will initiate the cooldown/
stopping sequences if the controller is in
normal running sequence.
LOAD BUTTON
This button will initiate the Auto Load
function when the controller is in normal
running sequence, but not ready to be
loaded.
- Initiate the loading sequences when the
controller is ready to be loaded.
- Initiate the not loaded sequence when
the controller is running in Loaded
Sequence.
MEASUREMENTS VIEW BUTTON
This button will enter the Measurements
View when not already in the
Measurements View, or when already in
the Measurements View it will enter the
Main View.
SETTINGS VIEW BUTTON
This button will enter the Settings View
when not already in the Settings View, or
when already in the Settings View it will
enter the Main View.
ALARMS VIEW BUTTON
This button will enter the Alarms View
when not already in the Alarms View, or
when already in the Alarms View it will
enter the Main View.
NAVIGATION BUTTONS
These buttons are used to navigate
through the display menu's.
ENTER BUTTON
Confirms/stores the selection/change.
BACK BUTTON
Moves back one level or ignores the
change.
- 27 -