Maintenance
USE OF SERVICE PAKS
Service Paks include all genuine parts needed for normal
maintenance of both compressor and engine. Service Paks
minimize downtime and keep your maintenance budget
low. You may order Service Paks from your local Atlas
Copco dealer.
SERVICE KITS
A service kit is a collection of parts to fit a specific repair
or rebuilding task.
It guarantees that all necessary parts are replaced at the
same time which improves the uptime of the unit.
To purchase service paks contact your local Atlas Copco
representative.
Hours Pak
Order number
500 hrs/6 Months
1310 9238 65
1000 hrs/24 Months
1310 9238 66
STORAGE
Run the compressor regularly, e.g. twice a week, until
warm.
Load and unload the compressor a few times to operate the
unloading and regulating components. Close the air outlet
valves after stopping.
If the compressor is going to be stored
without running from time to time,
protective measures must be taken as
described In a separate Service Bulletin
(ASB), which may be obtained on request.
Consult Atlas Copco.
- 46 -