Stopping - Atlas Copco XAS 185 CD7 T4F HOP Instruction Manual

STOPPING

After pressing the STOP button the display will show:
After a Stop command, or in case of a controlled stop
alarm, the machine will cool down and run at minimum
rpm for 1 minute before it will stop.
Active Buttons
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
- 36 -
After cooling down the engine will stop and the display
will show
MAIN VIEW
ENGINE STOPPING
41% 1286h --RPM
The engine is stopped, and the controller will do a double
check to see if the engine is really stopped.
Active Buttons
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
5.3bar