MPP Solar LV 6548 User Manual page 25

25 Record Fault code
Bulk charging voltage
26
(C.V voltage)
27 Floating charging voltage
AC output mode
*This setting is only
28 available when the inverter
is in standby mode (Switch
off).
Record enable (default)
24V model default: 28.2V
If self-defined is selected in program 5, this program can be set
up. Setting range is from 25.0V to 31.0V for 24V model and 48.0V
to 62.0V for 48V model. Increment of each click is 0.1V.
24V model default: 27.0V
If self-defined is selected in program 5, this program can be set
up. Setting range is from 25.0V to 31.0V for 24V model and 48.0V
to 62.0V for 48V model. Increment of each click is 0.1V.
Single: This inverter is used
in single phase application.
When the inverter is operated in 3-phase application, set up
inverter to be operated in specific phase.
L1 phase:
L3 phase:
23
Record disable
48V model default: 56.4V
48V model default: 54.0V
Parallel: This inverter is operated in
parallel system.
L2 phase: