Output 1-6 - Void Digidrive V2 User Manual

Digidrive V2
NOTE: The Input/Output EQ windows can be saved as a .png picture
file by clicking the camera icon in the top-left hand side of the
graphical EQ window in the Input/Output tabs. There is also a
magnifying glass icon, which allows users to set more precise
values for the EQ, and a full screen icon, which, when pressed once
fits the EQ window to the Live Link window, and when pressed again
sets the EQ window to full screen view. To exit full screen, press the
X icon. The T icon shows the information for the EQ previously
changed.
NOTE: When moving a certain band in the graphical EQ window,
holding CTRL and clicking will limit movement to horizontal (for Freq
and Q). Holding Shift and clicking will limit movement to vertical (for
Gain).

7.6.4............................................................Output 1-6

Each output tab contains control of 10 EQs, a Limiter,
Delay, LPF/HPF, Polarity, Gain and an Input Mixer.
The EQ is the same as the EQ for Inputs A-D, with a 20Hz
– 20kHz frequency range, -12.00dB to +12.00dB range of
gain and a Q from 0.20 to 25.00. Changing any of the EQ
settings is represented in the graph above the EQ
control matrix. Using the mouse left/right clicks and
dragging the EQ square in the EQ graph, users can
physically manipulate each EQ band's frequency and Q.
Along the bottom of the window if the HPF/LPF, these
can be set anywhere between 20Hz and 20kHz with the
number box, and the drop down menu chooses the type
of filter (Butterworth, Bessel, Linkwitz-Riley from 6dB/
Octave to 24dB/Octave).
The gain fader on the right-hand side of each output tab
relates to the fader in the Main tab's mixing matrix. If the
gain is changed in either of these windows, it will affect
it in the other.
23
User Manual