Digidrive V2
6.3................................................................Output Menus
Each output channel has a set of Menus for specific parameters,
accessed with the –PAGE and PAGE+ buttons.
Gain, refer to Input Menus
Delay, 0ms to 2000ms in 0.01ms steps. Depressing
the control wheel, units can be changed to feet or mm.
Low Pass, refer to Input Menus
High Pass, refer to Input Menus
PEQ 1-10, refer to Input Menus
Limiter, refer to Input Menus
Phase, can be normal or inverted polarity.
Link, select whether outputs 1/2 are linked as a stereo
pair.
15
Out 1
Delay
00.000ms
Out 1
Phase:
Normal
Out 12
On
Link:
User Manual
Need help?
Do you have a question about the Digidrive V2 and is the answer not in the manual?