Mpls Configuration Limits; Other Configuration Limits - Cisco ASR 9000 Getting Started Manual

Chapter 4 Configuring Additional Router Features
Table 4-8 Multicast Configuration Limits and Commands (continued)
Feature Limit Description
Maximum PIM routes
supported
Maximum PIM egress
states
Maximum PIM registers
Maximum number of
PIM group map ranges
learned from Auto-RP

MPLS Configuration Limits

Table 4-9
including the commands used to display and change the limits.
Table 4-9 MPLS Configuration Limits and Commands
Limit Description
Maximum traffic engineer
(TE) tunnels head

Other Configuration Limits

Table 4-10
used to display and change the limits.
Table 4-10 Additional Configuration Limits and Commands
Limit Description
IPv4 ACL
(access list and prefix list)
IPv4 ACE
(access list and prefix list)
OL-17502-01
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
Default Absolute
Maximum Maximum
Limit Limit
100,000 200,000
300,000 600,000
20,000 75,000
500 5000
summarizes the maximum limits for Multiprotocol Label Switching (MPLS) configuration,
Default Absolute Maximum Limit
2500 65536
summarizes the maximum limits for additional configuration limits, including the commands
Default Absolute
Maximum Maximum
Limit Limit
5000 16000
200,000 350,000
Configuration Command
maximum routes n
(router PIM configuration mode)
maximum route-interfaces n
(router PIM configuration mode)
maximum register-states n
(router PIM configuration mode)
maximum group-mappings autorp n
(router PIM configuration mode)
Configuration Command
(Global Configuration
Mode)
mpls traffic-eng
maximum tunnels n
Configuration Command
(Global Configuration Mode)
ipv4 access-list maximum
acl threshold n
ipv4 access-list maximum
ace threshold n
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
Configuration Limiting
Show Current Settings
Command (EXEC Mode)
show pim summary
show pim summary
show pim summary
show pim summary
Show Current Settings
Command (EXEC Mode)
show mpls traffic-eng
maximum tunnels
Show Current Settings
Command
(EXEC Mode)
show access-lists ipv4
maximum
show access-lists ipv4
maximum
4-25