Cisco ASR 9000 Getting Started Manual page 78

Configuring the Domain Name and Domain Name Server
To configure the DNS and DNS server, complete the following:
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
domain name domain-name-of-organization
Example:
RP/0/RSP0/CPU0:router(config)# domain name
cisco.com
Step 3
domain name-server ipv4-address
Example:
RP/0/RSP0/CPU0:router(config)# domain
name-server 192.168.1.111
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
4-2
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
configure
domain name domain-name-of-organization
domain name-server ipv4-address
commit
or
end
show hosts
Chapter 4
Purpose
Enters global configuration mode.
Defines a default domain name used to complete
unqualified hostnames.
Specifies the address of a name server to use for name and
address resolution (hosts that supply name information).
Note You can enter up to six addresses, but only one for
each command.
Configuring Additional Router Features
OL-17502-01